www.vistacnc.com
- 5 -
www.vistacnc.com
- 5 -
iMach
III
P1B Pendant LinuxCNC Manual v 1.0
2.5 AXIS ZEROING
Turn MPG one or few clicks clockwise or counterclockwise to zero selected axis.
HALUI MDI COMMAND lines are needed in .ini file. See P1B LinuxCNC Installation Instruction.pdf.
2.6 OFFLINE
When the pendant is in Offline mode, any MPG signals are not sent to LinuxCNC application.
Offline mode can be used to align the MPG wheel to a specific number with no axis movement.
2.8
FEED OVERRIDE mode
In F% mode, turning MPG changes current feed overridden (FO) rate.
2.9 SPINDLE OVERRIDE mode
In S% mode, turning MPG changes spindle speed overridden rate.
2.10 CONTINUOUS RATE mode
Same as F%. see 2.5 FEED OVERRIDE mode.
3.
E-Stop switch button
