www.vistacnc.com
- 7 -
www.vistacnc.com
- 7 -
iMach
III
M2 Pendant Manual v. 1.1
4.2
STOP / REW
button
:
While pressing and holding the Enable Button
, press and release STOP/REW
button to stop the program if the program is running, or rewind the program if the line of the
program is not zero, or stops any axis movement.
4.3
SPINDLE
button
:
While pressing and holding the Enable Button
, press and release SPINDLE button
to start the spindle if the spindle is off, or stop the spindle if the spindle in on.
4.4
F1 and F2
While pressing and holding the Enable Button
, press and release the
F1, or F2 function button to execute predefined Mach3 OEM button, Custom Button, or Custom
Macro.
4.5
Screen selection
Pressing and releasing SCR (SCReen) button
within 1 second will open or close the
TAB window on Mach3 screen, and pressing and holding SCR button for more than 1 second and
