www.vistacnc.com
- 5 -
www.vistacnc.com
- 5 -
iMach
III
M2 Pendant Manual v. 1.1
In CONT mode, press and hold jogging button to move selected axis till releasing the button.
To zero X axis, press and release EN and ZERO button once to enable zeroing, then within 1 second,
press X+ or X- to zero X axis. Apply the same to zero other axes.
3.
Feed rate and spindle speed change
Press FEEDRATE + button to increase Feedrate OverRidden (FRO)
10% each time. Press FEEDRATE – button to decrease FRO 10%.
