Vista VVRD28V12CM960H / U, Installation Manual

Page: 15 / 24

14
PICT ADJUST
Mirror: Off, on (horizontally inverts image).
Brightness: 0
– 255 (increments of 1)
Contrast: 0
– 255 (increments of 1)
Sharpness: 0
– 255 (increments of 1)
Hue: 0
– 255 (increments of 1)
Gain: 0
– 255 (increments of 1)
(in all of the above, the smaller the number, the darker or lower the setting that
is applied)
ATR
ATR (Adaptive Tone Reproduction) allows adjustment of the image to assist
with widely contrasting scenes of view.
Luminance: Low, Mid, High
(Sets the luminance applied)
Contrast: Low, Midlow, Mid, Midhigh, High)
(Sets the contrast enhancement)
MOTION DET
MOTION DETECTION: allows upto 4 areas of motion to be set up (note there
is no output)
Detect Sense:
0
– 127 (increments of 1)
(Sets the motion detection sensitivity, 0=low sensitivity, 127=high sensitivity)
Block Disp:
Off, On, Enable
(Applies a motion block trace in the user selected area. To define the area,
select ‘Enable’ and push centrally on the joystick. Use the Joystick to navigate
to the blocks you want to
Disable and not include in motion trace. To return to
the menu, push and hold central joystick for 2secs and release)
Motion Area:
Off, On
(Enables/disables the motion detection)
Area Sel:
1 - 4
(Selects the motion detection area)
Top: 0
– 244 (increments of 1) 0=top, 244=bottom
Bottom: 0
– 244 (increments of 1) 0=top, 244=bottom
Left: 0
– 474 (increments of 1) 0=left, 474=right
Right: 0
– 474 (increments of 1) 0=left, 474=right