Vista VK2-REC04HDW Quick Start Guide
16
2.5 Factory Default Information
The network port: 192.168.100.220
The wireless network Port: 192.168.30.1
Username: admin
Password: admin
Factory Reset
The NVR has a Factory Reset button on the rear panel. This button will only be used on the rare occasions
that you want to return
all
the settings to the original factory settings.
To reset the unit, you will need to follow steps:
1. Press the Factory Reset button more than 5 seconds while the NVR is operating.
2. While the NVR is initializing, the alarm LED will blink.
3. After initializing, the NVR will restart.
Caution
: When using the Factory Reset, you will lose
all
settings you have saved.
2.6 Support Contact Information
If you are experiencing problems setting up the VK2-REC04HDW, Vista technical support can be contacted in
the following ways:
Web –
www.vista-cctv.com/ip
Tel - +44 118 912 5000
