Vista VK2-HDX23IR-SMW, User Manual

Page: 79 / 100

VK2-HDX23IR-SMW User manual V1.0 Page 79
following:
* Domain name: Enter the domain(s) to search for the host name used by the network
camera. Multiple domains can be separated by semicolons (;). The host name is always
the first part of a Fully Qualified Domain Name, for example, myserver is the host name in
the Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is
the Domain name.
* DNS servers: Enter the IP addresses of the primary and secondary DNS servers.
• Host Name Configuration:
– Host Name:
Enter the host name to be used as device information in the client software or
SmartManager.
• Services:
– HTTP port: Enter a port to receive a service through the HTTP. Default port number is “80”.
– HTTPS port:
Enter a port to receive a service through the HTTPS. Default port number is
“443”.
– RTSP port:
Enter a port to receive a service through the RTSP. Default port number is
“554”.
• Link Speed Control:
– LAN Interface:
User can select Auto, Half duplex or Full duplex transmission method.
– Link Speed:
User can select either 10Mbps or 100Mbps.
When the settings are complete, click Save button to save the settings, or click Reset button to
clear all of the information you entered without saving it.