Quick Installation Guide
VK2-1080BIR37e Quick user guide V1.0
9
2)
Control toolbar
The live viewer toolbar is available in the web browser page only. It displays the following buttons:
The Stop button stops the video stream being played. Pressing the key again toggles the
start and stop. The Start button connects to the VK2-1080BIR37e or start playing a
video stream.
The Pause button pause the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the
image is saved can be specified.
The digital zoom activates a zoom-in or zoom-out function for video image on the live
screen.
The Full Screen button causes the video image to fill the entire screen area. No other
windows will be visible. Press the 'Esc' button on the computer keyboard to cancel full
screen view.
The Manual Trigger button activates a pop-up window to manually start or stop the event.
3)
Video Streams
The VK2-1080BIR37e provides several images and video stream formats. Your requirements and
the properties of your network will determine the type you use.
The Live View page in the VK2-1080BIR37e provides access to H.264, MPEG-4 and Motion
JPEG video streams, and to the list of available video streams. Other applications and clients can
also access these video streams/images directly, without going via the Live View page.
3.5 VK2-1080BIR37e Setup
This section describes how to configure the network camera, and is intended for product
Administrators,
who have unrestricted access to all the Setup tools; and Operators, who have access
to the settings for Basic, Live View, Video & Image, Event, and System Configuration.
You can configure the VK2-1080BIR37e by clicking Setup
in the top right-hand corner of the Live View
page. Click on this page to access the online help that explains the setup tools
When accessing the VK2-1080BIR37e for the first time,
the “Admin Password” dialog appears. Enter your admin
name and password, set by the administrator.
Note: If the password is lost, the VK2-1080BIR37e must
be reset to the factory default settings.
See “3.6 Resetting to the Factory Default Settings”.
