VIPER quick ser guide V1.0
6
NVR search and manual registration
Used to register cameras connected vi
a the WAN port, or cameras on the PoE ports which do not support “Zero
Config”
To register cameras using this method the “Auto Detection” function must be turned “off” for the relevant
channels. To do this got to:
Main Menu > Audio / Video > IP Camera Registration
The following screen will be displayed:
Click on the “Auto / Manual” button, the following screen will appear:
Any channel with a “tick” in the box is set to Auto Detection, click on the box to remove the tick for the channels
that requ
ire a manual set up, then click on “OK”.
Next click on the “Add” button in the bottom left of the screen, to display the Camera Registration menu page. If
cameras have previously been connected they will be displayed in the list with their channel numbers in the
Registration column.