17
PRIVACY
PRIVACY:
allows upto 8 masks to be applied to the image
(note that if motion
area in motion det menu is set to ‘on’, this reduces to 4 privacy zones)
Area Sel:
1 - 8
(Selects the motion detection area)
Top:
0
– 244 (increments of 1) 0=top, 244=bottom
Bottom:
0
– 244 (increments of 1) 0=top, 244=bottom
Left:
0
– 474 (increments of 1) 0=left, 474=right
Right:
0
– 474 (increments of 1) 0=left, 474=right
Colour:
1
– 8
(Choose from the following colours for the privacy zones - red, green, blue,
lime, cyan, magenta, white, black)
Transp:
0.00, 0.50, 0.75, 1.00
(Sets the transparency of the privacy zone area)
Mosaic:
Off, On
(when mosaic is set to On, all programmed privacy zones switch to a non
adjustable mosaic/tile distortion effect. For full mosaic, Transp needs to be set
to 0.00)
DAY / NIGHT
Day / Night:
make changes to the camera operation
Modes:
Auto, colour, B/W, Ext1, Ext2
Auto (auto switching between colour& monochrome)
Burst:
Off, on
(Allows the colour burst signal in monochrome to be removed if required)
Delay Cnt:
0
– 255 seconds (increments of 1)
Sets the hysteresis time before switching between colour/mono & mono/colour,
to reduce the ‘hunting’ effect
Day -> Night:
0
– 255 (increments of 1)
Sets the threshold for switching from day to night operation (The higher the
number, the darker it needs to be before switching to B&W)
Night -> Day:
0
– 255 (increments of 1)
Sets the threshold for switching from night to day operation (The higher the
number, the brighter it needs to be before switching to colour)
Colour:
Colour only operation
