17
DAY / NIGHT
Day / Night:
make changes to the camera operation
Modes:
Auto, Colour, B/W, EXT1, EXT2
(please note that the camera switches between colour/monochrome images
via the Photocell with EXT1 setting. If you wish to change Burst or IR Optimizer
settings then you will need to put the camera into B/W mode).
Auto:
Switches via AGC
– does not activate IR LEDs
Colour:
Colour only operation
B/W:
Monochrome only operation
Burst:
Off, On
(Allows the colour burst signal in monochrome to be removed if required)
IR Optimizer:
Off, On
Mode:
Auto, Centre
Level:
0
– 31 (increments of 1)
EXT1:
Photocell switching between colour/monochrome and activates IR LEDs
EXT2:
Not used
NR (2DNR)
Digital noise reduction is used to remove
‘noise’ from the image in low light
conditions when AGC is applied.
NR mode :
Off, Y, C, Y/C (Sets the 2D NR filter mode)
Y Level:
0
– 15 (increments of 1) Sets the Y filter (Luminance) strength.
C Level:
0
– 15 (increments of 1) Sets the C filter (Chrominance) strength.
Summary of Contents for VBC502-960H
