15
User 1 & 2:
Both User1 & 2 can be individually set up for specific applications.
B-Gain:
0 to 255 (increments of 1)
R-Gain:
0 to 255 (increments of 1)
Anti CR:
When shut+auto iris mode used, this setting can reduce (but may not
eliminate) colour roll caused by fluorescent lighting.
Manual:
A single scale, simultaneous adjustment of the B and R gain values
Level:
24 to 97 (increments of 1)
(The lower the number, the higher content of Red, the higher the number the
higher content of Blue in the image)
Pushlock:
Sets the white balance based on the lighting level at the camera at
that time (Best used when there is no change in the illumination level)
BACKLIGHT
Modes:
Off, BLC, HLC.
BLC:
Globally applies non adjustable BLC (Back Light Compensation) to the
image
HLC:
Globally applies non adjustable HLC (High Light Compensation
– Peak
White Inversion) to the image
PICT ADJUST
Mirror:
Off, on (horizontally inverts image).
Brightness:
0
– 255 (increments of 1)
Contrast:
0
– 255 (increments of 1)
Sharpness:
0
– 255 (increments of 1)
Hue:
0
– 255 (increments of 1)
Gain:
0
– 255 (increments of 1)
(In all of the above, the smaller the number, the darker or lower the setting that
is applied)
ATR
ATR (Adaptive Tone Reproduction) allows adjustment of the image to assist
with widely contrasting scenes of view (Wide Dynamic Range) .
Luminance:
Low, Mid, High
(Sets the luminance applied)
Contrast:
Low, Midlow, Mid, Midhigh, High)
(Sets the contrast enhancement)
Summary of Contents for VBC502-960H
