45
•
General:
Enter the name for a new event map.
•
Event In:
Select an event type in the drop-down list.
•
Event Out:
– E-mail:
Select the email addresses you want to notify via email that an event has
occurred.
– FTP:
Select checkbox beside FTP to record and save images to an FTP server
when an event has occurred.
– XML Notification:
It sends XML messages to a Notification server that listens for
these. The destination server must first be configured on the Event In page.
– Boost:
When an event has occurred, the encoder will boost the Frame rate and
Bit rate from the normal condition to this boosted level for the duration of the
event. Check the box to enable the Function.
– PTZ preset:
Select the preset position you want to move at event. If you want to
move back to home position after the event, which is pre-defined in the Alarm
Out - PTZ Preset page, check
“
Return to home position after event
”
box.
– Notification Server:
It sends notification messages to the notification server that
listens for these. The destination server must first be configured on the Event In
page. Enter a message you want to send.
When the settings are complete, click
OK
button to save the settings, or click
Cancel
button
to clear all of the information you entered without saving it.
