manualshive.com logo in svg

Vista 1/3" EX-VIEW CCD COLOR CAMERA, Installation Instructions Manual

Share
Download
Vista 1/3

SPECIFICATIONS

Function

Auto/Man Shutter Control(E.S.) :             Auto(On), Man(Off) (Dip Switch)
Manual Shutter Control :                          1/60(1/50), 1/100(1/120), 1/250,      
                                                                1/500, 1/1000, 1/2000, 1/4000, 
                                                                1/10,000(Dip Switch) 
Flickerless(F.F) :                                      ON/OFF (Dip Switch)
BLC :                                                        ON/OFF (Dip Switch)
EI :                                                           ON/OFF (Dip Switch)
D/N Conversion:                                      Color/BW (Dip Switch)
AGC :                                                       ON/OFF (Dip Switch)
D/N Mode Selection:                                Auto / Manual (Dip Switch)
White Balance :                                        Low(ATW) / Hi(AWB) (Dip Switch) 
Sync :                                                       Internal / Line Lock (Dip Switch)
Vert Phase Adjust :                                   Adjustable (POT)
DC Iris Level Adjust :                               Adjustable (POT)

Connector and Mechanical

Video Output :                                          BNC Connector
Power Input :                                            2-pin wire
Lens Mount :                                            Fixed Mount

   - 13 -

Summary of Contents for 1/3" EX-VIEW CCD COLOR CAMERA





















Reviews:

No comments

Brands by name

Popular brands

Load more brands