- 9 -
FUNCTION SWITCH
Gamma Switch (on/off) -
The gamma correction switch allows .45 correction for
non-linearity gain response in the monitor when set to ON.
When set to OFF, there is no gamma correction.
NC
AGC Select Switch (Normal/Hi)
AGC Normal: AGC Middle Gain.
AGC High: AGC Max Gain.
Only AGC Switch (Function, s/w No. 8Pin) ON.
AGC Switch (off/on) -
The auto gain control switch allows the video signals to
maintain a constant level. This switch is useful when using the camera at low-light
levels and when lighting levels change over time. For best low light conditions,
this switch should set to ON.
A
WB Switch (Low/Hi) -
This camera have two white balance setting.
ATW (auto tracing white balance) -
The camera automatically aim to maintain
white objects as white even if the light color changes. Switch Position "Low"
AWB (auto white balance) -
Quick ATW. Switch Position "Hi"
Sync Select Switch (int/LL) -
Use this switch to set the camera synchronization
mode internal (int) or Line Lock (LL).
8.
9.
0.
D/N Mode Selection (Auto/Manual)
Auto : D/N mode converse automatically. (AGC must set to ON)
Manual : User can select mode with D/N Conversion Switch.
(Function Pin 2)
D/N Conversion Switch (Color/BW)
D/N Color : Only Color.
D/N B/W : Only B/W.
When D/N Manual Mode. (Function, s/w No. 1Pin)
1.
2.
5.
7.
6.
N
O
2
1
OFF
B/W
OFF
Manual
ON
Color
ON
Auto
