VL-NVR 4/8/16CH Quick Guide V1.1
Page 13
To modify the IP\login details for any
“found” camera before “adding”:
Click
to edit the found IP camera to show the below. If required, input the new IP address, subnet mask, gateway,
“Username” and “Password” of the camera. Click “OK” to save the settings.
To modify the IP, login and name details for any
“added” camera:
Click
against any
“added” camera appearing in the lower part of the previous camera menu to edit the added camera, the
below is shown.
Input details as required: camera name, IP address, port,
“Username” and “Password” of the camera. You can click “Test” to test
the effectiveness of the input information before clicking
“OK” to save the settings.
NOTE: You can change the IP camera name only when the added camera is online. Click
“Next” to continue.
9. Record Settings:
Two record modes are available: auto and manual.
Auto
: Select a required auto mode for all cameras as per the below examples,
then click “OK” button to save the settings.
Manual
: Alternatively, s
et the “Sensor Record”, “Motion Record” and “Schedule Record” of each camera instead. Click “OK” to
save the settings.
