vissonic CLEACON User Manual Download Page 63

Page: 63 / 66

www.vissonic.com

63 VISSONIC ELECTRONICS LIMITED

7.3 Simple interpreter desk VIS-DIC-T

Refer to the 6.2.2 and set the unit VIS-DIC-T as the interpreter unit. Please check the display and
operation.

Screen

Description

Main screen,
'

Interpreter unit

'-Unit type

Out:01 ENG

' show the interpreter output

to channel number and language name.

Press the channel buttons

change the output channel.

Volume bar

to show the volume level to

speaker and headphone and press the

volume buttons

to adjust it.

Press the MIC button

to turn

on/off the microphone.

Show the

`speaking time

Digital clock

show the current

time.

Press the button

and hold for

mute for cough, release the button to
unmute.

7.4 Chairman unit and delegate unit display and operation

Microphones

The colors of the LEDs of the microphone buttons, the LED ring of MICand display show the
condition of the microphone that connected to the discussion unit.
MIC button color

LED ring color

Display character

Condition

Red(on)

Mic on

Microphone enabled

Summary of Contents for CLEACON



































































Search results

Summary of Contents for CLEACON

Reviews:

Related manuals for CLEACON

Brands by name

Popular brands

vissonic CLEACON, User Manual

Search results

Summary of Contents for CLEACON

Reviews:

Related manuals for CLEACON

Brands by name

Popular brands