Optical Termination Box
(
VSOF-OTB-E)
User Manual (Rev.0)
VISSEM OTB-E Manual Rev.0 TEL: 82-31-283-7852 FAX: 82-31-283-7844
All rights reserved by VISSEM Electronics Co. Ltd.
11. Routing Pigtail
Route cord and guide them into stacked
Splice tray
Insert cord into splice tray inlet and tie
Together by suing cable ties
12. Splicing
Splice fibers in accordance with
splicing method to be approved
13. Recording
Splice fibers in accordance with
splicing method to be approved
14. Cutting Drop Cable Gasket
Cutting Drop Cable Gasket and Inserting
Drop Cable
15. Inserting aramid yarn gripper
Fold th4e aramid yarn and put it in the
aramid yarn gripper
Press the steel part of aramid yarn gripper
with plier
Combine drop cable gasket and aramid
yarn gripper
16. Drop Cable Connection
Connect the drop Cable to the adapters on
the opposite side e
17. Routing Drop Cable
Arrange the cords on the spool
16. Finishing the Termination Box
Close the splice tray supporter and fasten it
by using a captive screw bolt.
Push the door back to the shelf and lock
them by using a key to be provided
The OPTICUBE has been made under strict quality control and tests. Our products passed several inspection criteria, specifications and other
certification standards.
The technical facts of the products are based upon reliable information, but the user should consider the usage and applicability of the product
before operation. Sellers do not assume any liability resulting from improper use. The contents of this manual are made in lieu of all warranties,
but sellers do not take the responsibility for any damage caused by users or any statements unrelated to this manual.
VISSEM Electronics
235-2, Deokpyeong-ri, Majang-myeon, Icheon-city,
Gyeonggi-do, Korea 467-812
www.opticube.co.kr
Email: [email protected]
Tel: 82-31-283-7852 Fax: 82-31-283-7844
ã
VISSEM OPT-M0711 Printed in Korea
