Viss IPL, Owner'S Manual

Page: 27 / 37

23
USING THE DEVICE
• Skin discolouration: this occurs very rarely. Skin discolouration
manifests itself as either a darker or lighter patch than the
surrounding area. This is the result of using a light intensity that
is too high for your skin colour. If the discolouration does not
disappear within 2 weeks, we advise you to consult a doctor. Do not
treat discoloured areas until the discolouration has disappeared
and your skin has regained its normal skin colour.
• Skin infection and inflammation: This occurs very rarely and may
be caused by using the device on wounds or cuts that resulted
from shaving, on already existing wounds or on ingrown hairs.
• Excessive pain: this can occur during or after treatment if you
have used the device on unshaved skin, if you use the device at
a light intensity that is too high for your skin colour, if you flash
the same area more than once and if you use the device on
open wounds, inflammations, infections, tattoos, burns, etc. See
‘Important’ chapter. (Ch. 3)
6.8 Skin rejuvenation
Skin Rejuvenation should be used on an as needed basis. Optimal
results are usually achieved after 2-3 months, with use twice a week.
1. Apply the optional Skin Rejuvenation Pre-treatment Gel to prepare
the skin and enhance results.
2. Insert the cartridge (Ch. 6.1)
3. Put on safety glasses and follow steps provided in “Operation”
section (Ch. 6.4) staying 1 inch away from the eye.
NOTE: CHOOSE AN INTENSITY LEVEL FROM 1-5 . DO NOT GO BEYOND LEVEL 5.
FOLLOW TANNING AND SUN EXPOSURE DIRECTIONS. (CH.5.1)
4. Apply the optional facial mask after treatment to relax, replenish
and hydrate your skin.