Viss IPL, Owner'S Manual

Page: 24 / 37

20
4. As long as it feels comfortable (not painful), increase the setting
by one level within the recommended range for your skin type and
apply one flash for each setting. Do not apply more than one flash
on the same spot.
6.4 Operation
1. Put on safety glasses.
2. Turn unit ON (main power switch &
power button).
3. Lift applicator out of its cradle and set
the appropriate intensity see ‘Setting
light intensity’ section (Ch. 6.2).
4. Place applicator on the desired area
making sure the silver sensor is placed
firmly against the skin (fig. 1), the device
will not flash unless in proper contact
with skin. (fig. 2)
5. Once a beep is heard and the green
‘ready to flash’ indicator light is ON, the
pulse is charged. (fig. 3)
6. Press the flash button.
7. Unit will take 3.5 seconds to charge, at
that time a beep will be heard and ready
to flash indicator light will be ON.
8. Move over area slightly overlapping, the
slight indentation in the skin should be
used as a guideline.
FIG.1
FIG.2
FIG.3