5
Xero 4
342-830.31
362-079.31
Xero 4 T
Xero 4
981-479.05/.06
981-479.05/.06
930-087.08
930-088.08
929-225.65
930-087.08
930-088.08
929-225.65
1
1
2
2
929-225.65
929-225.65
333-868.05/.06
333-381.05/.06
333-869.05/.06
16
0.630"
16
0.630"
333-382.05/.06
337-021.05/.06
12
+ 0.5
- 0
0.472"
+ 0.020"
- 0
R 6
0.236"
12
+ 0.5
- 0
0.472"
+ 0.020"
- 0
R 6
0.236"
1/2019 (US)
The aluminium profile must be fixed to the panel.
Assembly instructions
Shelf dimension for bracket 342-830.31
Shelf dimension for single bracket 362-079.31
Production drawings of glass
wooden are available for downloading
on www.visplay.com or can be received
on request.
Drawing no. 247-734
Production drawings of glass
wooden are available for downloading
on www.visplay.com or can be received
on request.
Drawing no. 247-138
Assembly on wooden panels
Please note that the fixing set 929-225.65 cannot be attached to Xero
4
T profiles. Panels with these profiles are to be attached to the wall
e.g. with wedge gibs.
Please observe the indications concerning weight loading and ensure that the substructure of the wall units and their fixtures can support
the expected loads.
Screw tho profile Xero 4 or Xero 4 T on to the panel from the rear. Fit fixing sets to the Xero 4 profile (
1
) or wooden ledges (
2
). The wooden ledge (
2
)
must be fixed to the panel (glued and screwed) near the Xero 4 T profile. Fix the profile end caps above and down to the profile, before the profile is
installed to the panel.
