9
Stripes 16
max. 2 Nm
1.5°
40
1.575“
1/2019 (US)
Instructions of use/ Care
With Stripes, the suspension arm of
the merchandise support is inserted
into the profile at an angle and then
lowered down.
Merchandise support slightly incli-
ned (1.5°).
The indicated weight loads are always based on the total weights of the merchandise support and goods.
Please observe that max. weight loads decreases as the merchandise support increases in length.
Please observe that the inclination of the merchandise support changes with an increase in load. Different weights on the merchandise
supports produce an uneven overall appearance of the goods display.
Please note that the weight limit can reduce considerably when Stripes 16 is used in glass and sheet metal.
Please also observe the weight loads indicated in our sales documentation.
Weight loads
Fixing set for Stripes profiles
To be screwed to the back of wooden panels.
Assembly instructions
Stripes 16 profiles will be screwed.
Please note that the attachment exerts
pressure and friction on soft wall types (e.g.
textured wallpaper) and can damage them.
The torque must be observed to ensure
the correct functioning of Stripes 16.
Max. load
Profile
per
625 mm
/25"
66 lbs
Fixing set
44 lbs
Front arm Ø
25 mm
/1"
44 lbs
Front arm Ø
12 mm
/½"
22 lbs
Bracket for side hanging rail Ø
25 mm
/1"
per bracket
55 lbs
Bracket for wooden or glass shelf
per bracket
44 lbs
Side hanging frame Ø
25 mm
/1"
66 lbs
Side hanging rail, T arm Ø
15 mm
/
5
⁄
8
"
, 390 mm
/15
3
⁄
8
"
44 lbs
Bracket Ø
12 mm
/½" for side hanging rail Ø
15 mm
/
5
⁄
8
"
per bracket
22 lbs
Bracket Ø
12 mm
/½" for wooden shelf
per bracket
22 lbs
Bracket Ø
15 mm
/
5
⁄
8
" for wooden shelf, concealed
per bracket
33 lbs
Clamping bracket for glass shelf
per bracket
33 lbs
Hat bar Ø
12 mm
/½"
6.6 lbs
Hook Ø
7.5 mm
/
9
⁄
32
"
6.6 lbs
Shoe shelf
4.4 lbs
