5
Kado 15
2
1
8x
4x
3
336-509.07:
368 × 368 mm
/ 14.488" x 14.488"
336-510.07:
768 × 368 mm
/ 30.236" x 14.488"
336-511.07:
1168 × 368 mm
/ 45.984" x 14.488"
1×
4×
372-642.06
C
B
A
1/2019 (US)
For mid-room constructions, with a minimum height of
1000 mm
/39.370“, a fastening to the floor is prescribed
in accordance with DIN EN 16121:2013.
Converter bottom
If a connection to the floor via a fastening set is not possible,
a converter bottom must be used.
Unscrew all the glides (1) slightly. Insert the 4 plates (2)
between the glides and the structure. Tighten the glides by
hand.
Place the converter bottom (3) on the mounted plates.
Production drawing of the back
panel is available for downloading on
www.visplay.com or can be received
on request.
Drawing no. 203-478
Set of panel fixation clips for wooden back panel
To secure back panels in the square holes (A) on the Kado 15 uprights.
Panels can be inserted in the frame (B) and removed again (C) by
applying slight pressure.
For vertical surfaces only (back and side panels). The back
panels can only be fitted and removed in one direction.
