3
Kado 15
1
2
3
2
1
3
4
5
336-375.09
1/2019 (US)
Installation of the construction
Lay the frame with gliders (1) on the floor. Insert the
4 connecting pipes (2) onto the corner pieces of the lower frame,
ensuring that the holes point inwards. Place on the upper frame (3)
and drive it into place with a rubber hammer.
Please observe the information on the loading values and ensure that the substructure of the wall installation/furniture and its fastenings
can cope with the expected loads. For free-standing furniture, ensure sufficient tipping stability.
Installation dimensions/planning instructions
All constructions from Kado 15 function according to the same principle and are delivered part-assembled in flat-pack form.
Take care that the pilaster strip will not get damaged.
Disassembly of the construction
Place a disassembly tool at each corner of the construction by hand
(1), with the nose of the tool inserted into the bottommost hole of the
vertical pipe (2).
Feed a screwdriver into the take-up of one of the tools (3) and press
down firmly (4); the pipe releases from the connecting piece. Carry out
the same procedure with the other tools.
Once all the pipes are released from the connecting corners, the frame
can be removed.
