Installing the Visonic PowerLink2
14
5.
Copy the Default Gateway IP Address as the Home Router IP Address Value
in the Visonic PowerLink2 Installation Form (See Appendix B).
6.
Copy the first three blocks of the IP Address to the Visonic PowerLink2 IP
Address Value in the Visonic PowerLink2 Installation Form (the last block of
the IP Address is 200 if DHCP is used, see Appendix B).
Example
: The
Default Gateway
value is 192.168.0.1:
The Home Router IP Address is 192.168.0.1.
The
IP Address
value is 192.168.0.3:
The Visonic PowerLink2 IP Address is 192.168.0.200.
Step 2: Logging In to the Router
You are required to login to your Router configuration interface.
1.
Open
your
Internet
Browser
and
in
the
Address
line
type
HTTP://<Home Router IP Address>.
Replace
<Home Router
IP Address>
with the value of "Home Router IP Address" from the
Installation form (see Appendix B).
2.
Once the Login page appears, type a username and a password to login.
Different Routers have different login interfaces. Refer to your Router's manual for
instructions.
If you are unable to login, call your home router installer or Internet service provider
for assistance.
Step 3: Port Forwarding Configuration
Router
port
forwarding
guides
for
your
router
can
be
found
at
http://www.portforward.com.
1.
In your Router's window, locate the
Port Forwarding
configuration screen.
2.
Set the Port Forwarding IP Address to the value of
Visonic PowerLink2 IP
Address
from the Installation Form (see Appendix B).
3.
Set Protocol to TCP.
4.
Set all port related fields to
443
Default Gateway
IP
Address