visomat comfort III, Instruction Manual

Page: 35 / 108

GB-35
english
B
3. In fl ate the cuff
Press the Start/Stop button. The device conducts
a performance test and all the display elements
light up.
The cuff is in
fl ated to the necessary pressure.
The actual measuring process then begins. The „ ♥ “
symbol on the display fl ashes to indicate the pulse
rate and there is an audible beep. The measure-
ment is taken, then the cuff is fully de
fl ated. The
end of measurement is indicated by a long beep.
The display shows the blood pressure levels of
systole and diastole along with the pulse rate.
4. Switch off the device
Press the Start/Stop button. The fi gures measured
are saved automatically.
Abridged instructions on measurement
B