Viso Systems VX01, Installation Manual

Page: 52 / 63

52 VX01 Installation Guide VX01
安装指南
Contact closure mode
接触闭合
接触闭合 接触闭合
接触闭合模式
模式 模式
模式
The contact closure mode is used to turn on and off the
VX01 via an external switch such as a contact, relay,
movement sensor etc.
接触闭合模式被用来通过外部开关，诸如触头、继电器、位
移传感器等打开和关闭
VX01
。
When the switch is closed will trigger a power on event and
when the switch is opened will trigger a power off event.
The power button on the VX01 can also still be used to turn
on and off the device as normally.
在开关闭合时，将触发电源打开，而当开关打开时，将触发
电源关闭。
VX01
上的电源键依然可以使用，执行对设备的
正常开关操作。
Note: If you whish the VX01 to start at a particular colour or preset when
powered on, just select a colour or preset and hold down the power
button for 2 seconds to save the power on state.
附注：如果希望
VX01
以特定颜色启动或在电源打开时预置，只需选择具
体的颜色或预置并长按电源键
2
秒钟，保存电源的状态。
Pin connection contact closure mode
插脚连接接触闭合模式