14
2 Open the Viso Light Inspector software
connected to the LightSpion via USB and
select
Setup - Spectrometer calibration
.
Then select custom calibration and click
on the new button. Note: The primary
factory calibration will not be lost, and
you can always return it.
3
Select “Load lamp file” to load the
calibration source spectrum. The system
will automatically calculate the intensity
of the source in candela based on the
lamp file at a distance of 0.5 m. If the
measurements are done at a different
distance, then click on the re-calculate
button. If you don’t know the lamp
distance but know the intensity value in
candela, simply insert it directly into the
candela box.
4 Make sure the calibration source has
been turned on for at least 30 min, so the
output is stable.
5 Click next and set the integration time to
a maximum possible value to ensure the
highest resolution, and therefore the best
calibration quality.
