23
LabSpion user guide
Manual power control
It can in some cases be necessary to control the light
source power manually. Such a case could be when
measuring a flash light which is powered using batteries
where the LabSpion
’s power analyser is unable to turn on
and off the light source automatically. Another case could
be when measuring a low voltage light source such as LED
chips with external power supply that has a low response
time when turned on and off and therefore would give an
inaccurate result of the ambient
light level.
To enable manual power control
simply select Setup->Power
control and select manual power
control.
When manual power control has been selected will the
“Viso Light Inspector” ask you manually to turn on and off
the light source when necessary as shown below.
