11
LabSpion user guide
Connecting power
The LabSpion comes with a standard IEC power in
connector and with standard euro power cable, but any
power cable can be used as the LabSpion support any
outlet voltage from 90-260VAC.
The power in connector
supplies power to the
goniometer motor and to the
power analyser and
subsequent to the light
source to be measured,
meaning that power supplied
will be identical to power
supplied to the light source to
be measured.
AC power supply cable plug
Warning: Risk of electric shock! Plug
installation shall be performed by a qualified
electrician.
A grounding-type (earthed) power plug that fits the local
power outlet must be used which you can acquire an IEC
power cable with a suitable grounding-type plug from most
consumer electronics stores.
When installing the plug connect pins as follows:
yellow and green wire to ground (earth)
blue wire to neutral
brown wire to live
