Vislink Strata RX, Technical Reference Manual

Page: 97 / 186

6
Installation 6-1
Strata RX
Technical Reference Manual
Installation
6.1 Chapter Overview
This chapter describes how to unpack and install your Strata RX.
The topics covered in this chapter are listed below.
6.2 Unpacking
Each unit is shipped assembled, wired, and factory tested. Each
unit is packaged in appropriate shipping containers.
Here are some tips to help you with unpacking your new
equipment:
Topic Page
Unpacking
6-1
Initial Inspection
6-1
Damage in Shipment
6-1
Mounting and Cabling
6-2
Power Connections
6-4
Grounding
6-7
Audio Connections
6-7
Signal Connections
6-12
Data Connections
6-12
Powering Up
6-17
Product Modifications
6-17
• Unpack the equipment carefully to avoid accidental
damage.
• Be sure to locate all parts and accessories.
• Verify that the items shipped agree with those listed on
the sales order.
• DO NOT discard the container or packing material until
you have inspected the equipment and are sure there is
no shipping damage. The container and packing must be
available in the event that a damage claim needs to be
filed with the shipping carrier.
6.3 Initial Inspection
After the equipment is unpacked, we recommend you inspect it
using the following checklist:
• Check for any dents or scratches. If the equipment is
dented or scratched, it may have suffered internal
damage as well.
• Check that the equipment is clean and dry.
• Check that no cables or connectors are broken, damaged,
or loose.
6.4 Damage in Shipment
Should any damage be discovered after unpacking the unit, use
the following procedure:
• Immediately file a claim with the shipping carrier.
• Forward a copy of the damage report to Vislink
Communications Ltd.Customer Service, at our US