8
4
Controlling the HDX-1100 with the Touch Panel
The touch panel screen on the front of the unit lets you perform routine setup and
maintenance functions and control the HDX-1100 directly as described in the following
sections.
4.1 Selecting a Preset or a Channel
The HDX-1100 recalls the most recently saved preset and channel when it is powered up.
You can select from up to nine preset configurations. All presets are set to a customer
supplied plan, or to standard factory defaults, which may changed to suit your needs. Up to
15 RF channels may be configured. To select a preset, do the following:
1. Press the
UP or DOWN
buttons below the
PRESET
bar in the display
2. The new
PRESET
selection will remain so until it is changed.
3. Press the
UP or DOWN
buttons below the
CHANNEL
bar in the display
4. The new
CHANNEL
selection will remain so until it is changed.
4.2 Selecting
the
RF
Output
Level
The HDX-1100 recalls the most recently saved RF output power level when it is powered up. To
select between high or low power for the RF output level, do the following:
1. Press
PA HIGH/LOW
key to toggle between HIGH or LOW RF output level.
2. Press the
PA ON/OFF
button to toggle between RF on and RF off.
NOTE: When changing channels or presets, the PA will automatically shut off to avoid
interference with other users, as the frequency changes. It must be manually turned on
again once the frequency change is complete (the display will change to new channel
selection).
Please refer to section 8 for complete information on using the local touch screen controller
