Page 22
HDR-1000 User and Technical Manual
HDR-1000 Screen:
Network Confi guration
Screen
Menu Path:
System > Network Setup
NOTE:
You may be logged out of the Web Browser Control Interface if changes are made on
the Network Confi guration Screen.
Hostname
(Hostname
Section)
To customize the receiver’s
Hostname
, enter a name, then click the
Apply
Button to set (below). Default = Vislink
DHCP
(Network Interface
ETH0 Setion)
Select
Enabled
or
Disabled
to select the
Dynamic Host Confi guration
Protocol
status, then click the
Apply
Button (below) to set. How you would
use this is dependent on your application. Normal = Disabled (Static IP
Address)
IP Address
(Network
Interface ETH0 Setion)
Enter the
Internet Protocol Address
such as
192.168.1.100
.
Subnet Mask
(Network
Interface ETH0 Setion)
Enter the
Subnet Mask
such as
255.255.0.0
.
Default Gateway
(Network
Interface ETH0 Setion)
Enter the
Default Gateway
address such as
192.168.1.1
.
Name Server
(Network
Interface ETH0 Setion)
Enter the address of your
DNS
server. The
Domain Name Server
translates
host names meaningful to humans into Internet Addresses.
Apply
Click the
Apply
Button to set the changes to your receiver. (See the important
note above.)
