Page 2
LGR User Guide and Technical Manual
Copyright © 2014
Part number RD000785
Printed in U.S.A.
Authorized EU representative: Vislink PLC
Quality Certifi cation
Vislink is certifi ed to ISO 9001:2008.
The Vislink trademark and other trademarks are registered trademarks in the United States and/or other countries.
Microsoft®, Windows®, and Internet Explorer® are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Proprietary Material
The information and design contained within this manual was originated by and is the
property of Vislink. Vislink reserves all patent proprietary design, manufacturing, reproduction use, and sales rights
thereto, and to any articles disclosed therein, except to the extent rights are expressly granted to others. The
foregoing does not apply to vendor proprietary parts. Vislink has made every effort to ensure the accuracy of the
material contained in this manual at the time of printing. As specifi cations, equipment, and this manual are subject
to change without notice, Vislink assumes no responsibility or liability whatsoever for any errors or inaccuracies that
may appear in this manual or for any decisions based on its use. This manual is supplied for information purposes
only and should not be construed as a commitment by Vislink. The information in this manual remains the property
of Vislink and may not be used, disclosed, or reproduced in any form whatsoever, without the prior written consent of
Vislink. Vislink reserves the right to make changes to equipment and specifi cations of the product described in this
manual at any time without notice and without obligation to notify any person of such changes.
General Safety Information
The following safety requirements, as well as local site requirements and regulations,
must be observed by personnel operating and maintaining the equipment covered by this manual to ensure
awareness of potential hazards. This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instruction
manual, it may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
1) The Live Gear Receiver complies with Part 15 of the FCC Rules. Operation is subject to the condition that this
device does not cause harmful interference.
About this Manual
This manual is intended for use by qualifi ed operators, installers, and service personnel. Users
of this manual should already be familiar with basic concepts of radio, networking, video, and audio. For information
about terms in this manual, see
Glossary of Terms and Abbreviations
Part No. 400576-1). Pay special attention to
Notes, Cautions, and Warnings.
§
Read NOTES for important information to assist you in using and maintaining the equipment
§
Follow CAUTIONS to prevent damage to the equipment.
§
Follow WARNINGS to prevent personal injury or death.
