VX SERIES LED HEADLIGHT
TIP:
For complete application guide see web site
STEP 1:
Low Beam
STEP 2:
Center line of Low Beam
STEP 3:
High Beam
2
1
3
TESTING THE LIGHT
1. After all connections have been made start your vehicle
and test your switch to make sure it turns on the light prior
to reassembly.
2. Make sure the angle of your light is correct, otherwise
adjust the light angle again.
3. Make sure no wire or other components of the harness are
exposed to water spray, excessive heat, or moving parts.
P-HLHI4-
High Low High 4 adapter engages all three beam
modes simultaneously to dramatically increase visibility and
output.
P-HLHI4H13-
High Low High 4 adapter engages all three
beam modes simultaneously to dramatically increase visibility
and output. (For use with XIL-7RDKITJK With H13 Plug)
P-HLCBAH13-
Single Canbus Integration adapter levels
electrical current to remove electrical interference from the
vehicle and eliminate flickering in light.(For use with non
XIL-7RDKITJK part #’s)
Halo
Low
High
HLHI4
HEAD LIGHT ALIGNMENT
ADAPTERS/ACCESSORIES
