manualshive.com logo in svg

VisionX VL-Series, Installation Instructions & User Manual, Page: 4 / 4

Share
Download
VisionX VL-Series Installation Instructions & User Manual Download Page 4

VISIONXLIGHTING.COM

MAINTENANCE

All Vision X models have been designed for maintenance free use. 

In the case that an LED lamp or other part replacement is needed 

please contact your authorized service center.

LIGHT ANGLE ADJUSTMENTS 

1. 

Use a 13mm socket to loosen the 1 Hex head bolts Part (B2)

 

on the side of the light.

2. 

Adjust the light to your desired angle and tighten Bolt (B2).

ADJUSTMENT KEY

Part   (B2) Bolt 

          a. 13mm Hex Head Bolt

(B2)

(B1)

(Mounting Bracket)

(W1)

(N1)

MOUNTING KEY

Part   (B1) Bolt

Part   

(Mounting Bracket) 

Part   (W1) Washer 

Part   (N1) Nut 

MOUNTING DIAGRAM 

2.21”/56.2mm

Summary of Contents for VL-Series

Page 1: ...VISIONXLIGHTING COM Installation Instructions User s Manual PERFORMANCE LED LIGHT DUTY LIGHT ...

Page 2: ...reading instructions before installing 2 Consult your local state regulatory agency regarding the use of LED lighting 3 The placement of LED lighting should not restrict airflow to the radiator or block head lamps turn signals or parking lights About The VL Series LED Work Light 1 2 3 Qty 1 Qty 1 VL Series Light actual light may vary Included only with certain models Pigtail Hex Head Bolt M5 M5 LIG...

Page 3: ... 32V DC Positive Input Wire Part B1 Ground Wire a 9 32V Negative Input Wire Red R1 Black B1 WIRING DIAGRAM IF APPLICABLE P1 To Light MOUNTING INSTALLATION INSTRUCTION 1 Determine where the light lights will be placed 2 Place mounting bracket with light to desired location Using a marker or pick tool mark the center point of the bolt hole on the mounting surface 3 Set the light aside Drill out a la...

Page 4: ...ur authorized service center LIGHT ANGLE ADJUSTMENTS 1 Use a 13mm socket to loosen the 1 Hex head bolts Part B2 on the side of the light 2 Adjust the light to your desired angle and tighten Bolt B2 ADJUSTMENT KEY Part B2 Bolt a 13mm Hex Head Bolt B2 B1 Mounting Bracket W1 N1 MOUNTING KEY Part B1 Bolt Part Mounting Bracket Part W1 Washer Part N1 Nut MOUNTING DIAGRAM 2 21 56 2mm ...

Reviews:

No comments