23
VisionStat Plus Video Monitoring and Obstacle Detection Sensor System
Symptom
Possible Causes and Solution
No Picture
Ensure that Cameras are connected properly.
No Sound
Ensure the volume is turned up to a desired level
and not muted.
Dark Picture
Ensure brightness and contrast are adjusted cor-
rectly. Check whether the environment temperature
is too low.
No Color
Adjust color settings.
Upside down or inverted picture
Use the remote control horizontal/vertical selection
switch to set proper orientation. This can also be
done using the Menu button on the Monitor and
going to System settings.
No reversing function
Check that the correct corresponding color coded
trigger wire is connected properly. For example,
the rear Camera is typically connected to the
BROWN 4-pin connector, so the BROWN trigger
wire would need to be used to toggle the Monitor to
that channel, in this case, Channel 3.