GATEWAY INSTRUCTIONS
1.
With your new VisionNET service, placing a call is the same as
before with your other provider
’s service.
2.
To use the features listed above, simply get outside dial tone by
selecting a CO Line appearance or dial an access code if your
phone system has provided that. In most cases, the access code
is 9.
3.
Then, dial the access code you would like to use. For instance, if
you want to forward your main number to an outside number,
dial
*72 and the number you are forwarding to (e.g. 614-555-
1212)
Then hang up. To cancel the forwarding, dial
*72
and
hang up. When you do this, make sure you are going out on line
1.
VOICE MAIL INSTRUCTIONS
LOGGING INTO YOUR VOICE MAILBOX
Dial
*97
for
Voice Mail
(VM)
Enter VM PIN
CHECK MESSAGES
Log into your voice mailbox
Press
1
to hear your messages
MAILBOX OPTIONS
Log into your voice mailbox
Press
3
to hear your options
CHECK MESSAGE REMOTELY
Call main number
When auto attendant answers
Dial * plus 8(
IVR password
)
–
lost it? Refer to user manual
Then enter your password again
TO RECORD YOUR AUTO ATTENDANT RECORDING
Obtain Dial Tone
Dial Your IVR Number (from user manual)
Enter your password (from user manual)
Listen for instructions.
