(Allows manager to add up to 998 cards to
the Reader in a single step.) Takes 2
minutes to program.
#(The first card number) #
Card
s’ number must be consecutive;
Card quantity = number of card to be enrolled.
3. Exit
*
Add Panic Users
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Add Card:
1 (User ID) # (Read Card / Input 8/10 digits
Card number) #
3. Exit
*
Delete User Card
Programming Step
Keystroke Combination
1. Enter Program Mode
﹡
(Master Code) #
2. Delete User
– By User ID
OR
2. Delete User
– By Card
OR
2. Delete User
– By Card number
OR
2. Delete All User
2 (User ID ) #
2(Read Card)#
2(Input 8/10 digits Card number)#
2(Mater Code) #
3. Exit
﹡
Set Relay Configuration
The relay configuration sets the behaviour of the output relay on activation.
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Pulse Mode
OR
2. Latch Mode
3 (1-99) #
The relay time is 1-99 seconds. (1 is 50mS.)
Default is 5 seconds.
3 0 #
Sets the relay to ON/OFF Latch mode
3. Exit
*
Set Access Mode
Programming Step
Keystroke Combination
1. Enter Program Mode
*
(Master Code) #
2. Card access
OR
2. Multi-Cards access
4 0 #
4 3 (2~9) #
3. Exit
*
