10
9. User Operation
10. Alarm Function
9.1 Entry by card mode,
Set multi cards to open door when card quantity is 1.
Read user card, lock will be unlocked.
10.1 Anti-tamper alarm
9.2 Entry by card mode, Set multi cards to open door when card
quantity is 2-10.
Read
these cards one by one, present each card in 5 seconds, lock will be unlocked.
9.3 Entry by card and PIN
Present card, then press PIN (4 to 6 digits), #, lock will be unlocked.
9.4 Entry by card or PIN mode
Present card, lock will be unlocked.Or
Press PIN (4 to 6 digits), #, lock will be unlocked.
9.5 Relay mode
9.6 Modify user PIN (no need enter programming mode)
Press 43 1 #
Flash LED light (factory default setting).
Manager card operation
8.20 Add user
Read Manager Add Card, read user cards continuously, read Manager Add card again.
8.21 Delete user
Read Manager Delete Card, read user cards continuously, read Manager Delete card again.
Relay setting -pulse mode
Every time a valid card/tag read or PIN input, the relay will operate, for the pre-set relay
pulse time.
If the device is disassembled illegally, the buzzer and the external alarm will operate.
10.2 Door contact alarm
When connect with door contact, if the door is opened
illegally, the buzzer and the external
alarm will operate.
10.3 The Anti-duress alarm
When read anti-duress card or input 8-digit anti duress PIN, then press #, the corresponding
lock will open, at the same time, the external alarm will operate, but the device buzzer will not
operate.
Relay setting-Toggle mode
Every time a valid card/tag read or PIN input, the relay changes state, which will not
turn back until read card/tag or input PIN again.
*, read user card, press old 4 to 6 digits PIN, #, new 4 to 6 digits PIN # ,repeat new 4 to 6
digits PIN #.
Or *, press ID number # old 4 to 6 digits PIN,# ,new 4 to 6 digits PIN # ,repeat new 4 to 6
digits PIN #.
Notice: User who do not have user card must get ID number and origin PIN from Admin.
