Visioneer PATRIOT P90, User Manual

Page: 23 / 61

S
CANNER
U
SER
’
S
G
UIDE
23
L
O A D I N G
D
O C U M E N T S T O
S
C A N
Always remove any staples or paper clips from documents before inserting them into the scanner. Staples and
paper clips can jam the feed mechanism and scratch the internal components. Also remove any labels, stickers, or
Post-It™ notes that may come off during the scanning process and get stuck in the scanner. Misuse as described
here will void your scanner’s warranty. Please go to
www.visioneer.com , select your product, and then click the
“Warranty Program” link to view the warranty terms and conditions for your scanner.
S
UPPORTED
D
OCUMENT
T
YPES
You can scan the following types of documents and cards with this scanner.
n Maximum amount of paper in the input tray
l
Approximately 150 pages of 20 lb (80 g/m
2
) A4 paper
n Document size
l
Minimum size (width x length)
m Single page 1.97 x 2.56 inches (50 x 65 mm)
m
Multiple pages 1.97 x 3.35 inches (50 x 85 mm)
l Maximum size (width x length) – 12.16 x 17 inches (308 x 431 mm)
l
Maximum length with long document enabled
m 240 inches (6096 mm) up to 200 dpi
m
218 inches (5540 mm) up to 300 dpi
m 59 inches (1500 mm) up to 600 dpi
n
Mixed document stacks
l Scanner minimum to maximum without long document enabled
Arrange the documents so that all items are centered in the stack. The document sensor, paper
separation, and feed rollers are located in the middle of the paper path. If smaller items are offset from
the center they will not be detected. This will cause feeding issues and paper jams.