- Map Linked: A map to display the driven position is shown on the right bottom corner in case
that PC is connected to the Internet. (A map can not be shown if GPS data reception was not
good at the accident scene even if the PC is connected to Internet)
- Screen size edit: Full screen size of display for 1280 * 960 videos is supported if “full screen” icon
on the right bottom corner of the program is clicked. The original size is restored if an additional
double click is executed or “Original size” icon is clicked.
- Impact graph analysis: a graph on the right bottom corner displays the impact information of
front and back/left and right/top and bottom at the moment of event record
Impact intensity of front and back, the driver centered: x axe (0.000G~+-3.000G)
Impact intensity of left and right, the driver centered: x axe (0.000G~+-3.000G)
Impact intensity of top and bottom, the driver centered: x axe (0.000G~+-3.000G)
- AVI convert ( ): A folder location to store the file is prompted if ( ) icon is clicked
during preview/pause status of a certain video file in the list. “xxxx.avi” file is created as the same name
displaying a message of “AVI file recording” when the folder location is confirmed and
the “play” button is pressed.
- Program information: Program information such as program version of analyzer is shown if
information icon ( ) is clicked.
- Configuration: configuration such as password can be set if configuration ( ) icon is clicked.
8-3) User configuration
-The user can edit the system configuration values to their preference.
①
Set recording quality.
Recording video (640 * 480 is the default record resolution after shipment, the file
size should be higher if better recording quality is desired)
Low High
VGA HD
(640×480, Max 30fps) (1280×960, Max 15fps)
②
Set the impact detection sensor.
A default value is set after shipment and moderate values can be set considering
the car type and pavement status. The sensor can not detect an event if the
sensitivity value is set too high, it will not sense slight impacts. On the contrary,
the sensor can detect too many events if the sensitivity value is set too low,
becoming very sensitive to impacts.
8. PC analysis program usage
Summary of Contents for VD-3000
Page 1: ...VD 3000 User Guide Ver 1 1...
