© 2017
w w w . c l a s s i c e x h i b i t s . c o m
Step 5 of 7
Order #XXXXX
Left Backwall Attachments
10
11
11A
12
Completed Left Assembly
Item
10
11
11A
12
Qty.
1
1
1
1
Description
11.5” Horizontal Extrusion
26.75” Curved Extrusion
Flange Plate
20.3” Curved Extrusion
*
*
*
*
Screw
Scale: 40
Connector
Literature Holder Attachment
Locks
Literature
Holder
Attach angled end of Connector to
Literature Holder. Attach flat end of
Connector to vertical extrusion.
Tighten locks to secure.
*
Monitor Mount
Connectors
*
Slide Connectors into groove
of Extrusion. Tighten Set Screws
to secure Connectors in place.
Attach Monitor Mount back
plate to Extrusion, using Bolts.
Bolts
Monitor
Mount
*
Shelf
Shelf Attachment
Insert Lock into groove of Vertical
Extrusion, then tighten Set Screw.
Lock
Set Screw
Back of Shelf
*
*
10
11
11A
12
Screw
*
Shelf
*
Counter Top Attachment
*
Wing Nut
Fixed
Screws
Flange
Plate [11A]
11
10
Counter Top
Attach Flange Plate [11A] to Curved Extrusion
[11], using screw. Insert Fixed Screws, located
on underside of Counter, into holes of Flange
Plate. Secure with Wing Nuts.
Steps:
1) Attach assembled Extrusions [10/11] to Verticals [2] & [4].
2) Attach Curved Extrusion [12] to Curved Extursion [11].
3) Connect Flange Plate [11A] to top of Curved Extrusion [11],
using screw.
4) Attach Counter Top to Flange Plate [11A].
See
Counter Top Attachment
detail.
5) Attach Shelves to Curved Extrusion [11].
See
Shelf Attachment
detail.
6) Attach Monitor Mounts to Vertical Extrusions [3] & [5].
See
Monitor
Mount
detail.
7) Attach Literature Holders to Vertical Extrusions [3] & [5].
See
Literature
Holder Attachment
detail.
Note: Horizontal Extrusion [10] and Curved
Extrusion [11] stay assembled for
shipping and packing.
4
5
2
3
