w w w . c l a s s i c
e x h i b i t s . c o m
Step 1
Page 1 of 4
866.652.2100
© 2009
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #xxxxx - Sacagawea - Backwall Assembly
Turn Knob Clockwise
to Tighten Lock
STAR
indicates location of
knobs on BACKSIDE of unit.
**
Do not over tighten Knobs.
**
Knob
Knob
GREEN STAR
indicates
location of connection
lock with knob.
Set upper horizontal bars
[51/5b] to be flush with
top of vertical extrusions.
Horizontal Placement
3a
5a
Stopper
Item
1
2
3
2a
3a
4a/4b
5a/5b
6/6a
Description
Base Plate
42”h Lower Square Vertical Extrusion w/ A10 Clamps Attached
42”h Upper Square Vertical Extrusion w/ A10 Clamps Attached
42”h Lower Square Vertical Extrusion w/ A10 Clamps Attached
42”h Upper Square Vertical Extrusion w/ A10 Clamps Attached
45”w Horizontal Extrusion
45”w Horizontal Extrusion
2.5”h Angle-Cut Vertical
Qty.
2
1
1
1
1
1/1
1/1
1/1
Steps:
1) Attach vertical extrusions [2] to base plates [1].
2) Attach upper vertical extrusions [3 and 3a] to lower extrusions [2 and 2a]
using connection bar [a].
3) Connect horizontal extrusions [4a to 4b and 5a to 5b] together using connection bars [b].
4) Attach horizontal assemblies [4a/4b and 5a/5b] between vertical assemblies as shown.
5) Attach angle-cut verticals to top of assembled backwall where indicated.
6) Apply graphic to back of assembled backwall.
7) Attach light to top of assembled backwall.
2a
3a
1
4a
1
2
3
5a
4b
5b
Connection
Bar
Slide Connection Bar
between Extrusions
and tighten Knobs
to secure.
Connection
Bar
Graphic Attachment
Apply graphic to back
of assembled backwall.
Connection
Bar
a
a
b
Connection
Bar
b
A10 clamps attached to vertical extrusions for Wing
Attachment
6a
6
3
6
Tighten setscrew
to secure
2.5” Vertical Attachment
Back View of Backwall
5b
Insert connect into
groove of extrusion [3].
Tighten setscrew
to secure.
Light Connection
Attach Lights to
Backwall where
desired and tighten
in place.
A10 clamps attached to vertical extrusions for Wing
Attachment
