background image

8

Terms and conditions of sale

The StandBright2 is guaranteed from manufacturing faults for 2 years from 

the date of purchase.

For all returns and repairs please contact your local distributor or VisionAid 

for a returns authorisation number (RMA) for it to be dealt with quickly and 

efficiently. Units returned without an RMA will delay processing and may not 

be accepted.

This product is UKCA marked and fully conforms with the 

requirements of the relevant UK legislation.

This product is FCC marked and fully complies with all applicable 

United States legislation.

This product is CE marked and fully complies with all applicable 

EU legislation. 

At the end of the product’s life you can return it to the supplier or 

manufacturer for free of charge disposal. This is to comply with  

‘The Waste Electrical and Electronic Equipment Directive’ (WEEE).

How to contact VisionAid Technologies Limited

Phone number:

   Freephone UK:  

0800 002 5555 

  International:  

+44 (0)1775 711 977

Web address:

  

www.visionaid.co.uk  

Email:

 

 

  [email protected]

Postal address:

  

VisionAid Technologies Limited

    Bridge 

Lodge, 

Spalding 

Common, 

    Spalding, 

Lincolnshire. 

PE11 

3AU 

    United 

Kingdom

Summary of Contents for StandBright 2









Reviews: