12
This is useful when the cameras are installed in different artificial
lighting conditions where a standard
‘White Balance’ condition is
not suitable for all.
(1) AWB MODE
1. Please position the cursor on
‘AWB’ on the
SETUP menu by using the UP and DOWN selections.
2. Please select the mode you wish to operate by using the
LEFT or RIGHT selection.
3. Please select one of the 8 modes below.
(2) ATW (Auto Tracking White Balance)
-
IN : This mode can be used within the color temperature range of 2,500˚K~7000˚K.
-
OUT : This mode can be used within the color temperature range of 1,800˚K~10,500˚K.
☞
NOTE : In case of indoor use, ATW(IN) mode is higly recommended.
(3) PUSH MODE
:
This mode can be used within the color temperature range
of 1,800˚K~10,500˚K.
☞
NOTE : In case of outdoor use, PUSH mode is recommended.
(4) HOLD MODE : This mode is used to fix AWB in a specific environment.
☞
NOTE : When there are drastic movements of some specific colored features such as red, blue,
green or yellow cars on the express road and when environment is volatile so much, HOLD MODE
is strongly rcecommended.
(5) TRACK MODE : Sets some specific range of color temperature. ( 23 types of color temperature
can be set within
1,500˚K~15,000˚K range.)
(6) USER MODE
USER MODE is suitable for enhanced users who want to set red and/or blue value manually
according to user
’s environment.
Please change to manual adjustment mode and press OSD Switch.
Set the appropriate color temperature, and then increase or decrease the red and blue color values
while monitoring the color changes on the screen.
- RED : Adjust the level between 00 ~ 50(Default 17)
- BLUE : Adjust the level between 00 ~ 50(Default 40)
(7) 8,000˚K/6,000˚K/4,200˚K/3,200˚K MODE
-
8,000˚K : Shade
-
6,000˚K : Cloudy weather
-
4,200˚K : Fluorescent light
-
3,200˚K : Electric light blub
(8) AWB RESET