Each user PIN must be assigned a two digit authorization level:
01
All system operation and programming
02
All system operation and programming, except User PIN programming
03
System operation only, no programming
04
System arming only, no diarming, bypassing, or programming
PIN Authorization Levels
[2] Temporary PIN (automatically cancelling)
2 +
User PIN 08 can be programmed to automatically expire. Set the PIN’s duration (in days)
here. Select a value between 01 and 98 days; or, 99 for a permanent PIN.
User PIN 01 cannot be erased and must have Authority level 01
Note
Note
Note
Note
Note
If you continue, Vision will automatically advance to the address of the next PIN and wait for
a four digit code + + two digit autorization level , etc... and automatically return
to ‘Home’ of User Programming after the eigth user PIN is programmed. At any time,
can be pressed once to return to ‘Home’ of User Programming; press a second
time to return to system-wide ‘Home’.
During the sequence shown above, when you are requested to enter a 4 digit PIN number,
you can change a PIN number by entering the new 4 digit PIN over the old PIN. To delete
a PIN number, press instead of entering a 4 digit code. Proceed to press and set a
Authorization Level to finish the programming sequence.
Changing/Deleting User PINs
#
Clear
#
Clear
[3] Utility PIN
3 +
User If you system is equipped to operate auxilliary equipment (such as an electronic or
magnetic door lock), the code used to activate this feature can be programmed here.
9
Complete sequence to program a User PIN
+ 8 + PIN + 1 + + PIN address (02, 03, 04, etc...) + + New 4 digit code +
+ 2 digit Authorization Level +
(#, # to exit programming)
Complete sequence to set duration of temporary PIN
+ 8 + PIN + 2 + + days +
(#, # to exit programming)
Complete sequence to program the Utility PIN
+ 8 + PIN + 3 + + 4 digit PIN +
(#, # to exit programming)