System Operation
- Arm without entry delay: press + during Exit Delay period.
- Arm without exit delay: press +
during Exit Delay period.
- Your entire security system can be turned on by pressing the button for
approximately two seconds.
- A PIN number can be required before pressing to turn on the system.
Ask your security company if you would like this feature activated.
Additional Arming Options
9
Utility
The green ‘Ready’ light indicates that all detectors are secure and ready to arm.
If the ‘Ready’ light is not on, one or more detectors are activating (open) and are
not ready to be armed. Depending on your system’s design, this may or
may not prevent your system from arming. Vision’s Zone Indicator lights
display which zone(s) have detectors which are in alarm (or open). Check
the detector(s) on the zone(s) and arm your system. If you are ub3cle to
reset the detectors and return to ‘Ready’ mode, call your security company
for assistance.
After pressing to begin arming, keypads will beep slowly during the exit
delay period (if applicacle). The tempo increases for the last ten seconds
of the exit delay period and a sustained tone indicates that the delay period
has expired and arming is now complete. After the arming process has
been initiated, a valid user PIN must be entered to cancel arming.
4