manualshive.com logo in svg

Vision X XPI, Installation Instructions & User Manual

Share
Download
Vision X XPI Installation Instructions & User Manual Download Page 1

You May Also Be Interested In:

Part # - 9891019
Item # - XIL-OEH0713JKXPI12
Jeep JK Vehicle Specifi c Hood Mount Bracket (

visit              

www.visionxusa.com for a full list of vehicle specifi c products

)

Part # - 4006522
Item # - XIL-B150
Billet Tube Mount
(

0.75”-2.0” Diameter Available)

Part # - 4000308
Item # - XIL-LICENSEP
License Plate Mount For Up To 
12”  LED Light Bars.

Part # - 9892313
Item # - XIL-WINCH6
Winch Mount For Up To 12” LED 
Light Bars

Part # - 4006195
Item # - P-HARNESS.XIL
Single Light Harness

www.VISIONXUSA.com

Installation Instructions & User’s Manual

Summary of Contents for XPI

Page 1: ...ehicle specific products Part 4006522 Item XIL B150 Billet Tube Mount 0 75 2 0 Diameter Available Part 4000308 Item XIL LICENSEP License Plate Mount For Up To 12 LED Light Bars Part 9892313 Item XIL WINCH6 Winch Mount For Up To 12 LED Light Bars Part 4006195 Item P HARNESS XIL Single Light Harness www VISIONXUSA com Installation Instructions User s Manual ...

Page 2: ...ding the use of LED lighting 3 The placement of LED lighting should not restrict airflow to the radiator or block head lamps turn signals or parking lights MAINTENANCE 1 All Vision X models have been designed for maintenance free use In the case an LED lamp or other part replacement is needed please contact your authorized service center TIP Vision X recommends the use of liquid thread locker or L...

Page 3: ... bar 3 Place each mounting feet F1 with bolt head pointing into light bar into the feet grooves on the back of the light bar 4 Mark the location of each mounting feet on your vehicle Drill holes for each The feet can slide inside the grooves letting you fine tune the location 5 Remove the nut from the feet bolt and place the light bar onto your vehicle line up the bolts with the previously drilled...

Page 4: ...ver disassemble the products as all parts must be factory serviced to insure proper operation 3 Don t interchange the parts inside this light with other products 4 The LED light is to be mounted on the vehicle only in a vertical bottom mounting or in a suspended position 5 After turning on the light the body might be hot enough to warrant a burn risk Be careful when you touch the body after turnin...

Reviews:

No comments

Brands by name

Popular brands

Load more brands