12
13
6. Features
7. Trouble shooting guide
Compatible to the industrial standard
2-gangs junction box
The mounting hole is compatible to
the standard electric junction box for
a quick and easy installation.
1/2” standard conduit hole
Pipe insertion from the side or from
the back of the dome is provided.
Additional Video Output terminal is provided
so that the installer can adjust the zoom/focus
and direction of camera on the spot.
C. Industrial standard mounting arrangement
A. Vandal-proof
The body is made of 4.0mm thick die-cast and the dome made of 2.2mm thick
polycarbonate to be protective from a high impact of vandalism on the dome.
B. Tamper resistant
The dome is secured with a tailor-made stainless steel safety screws. (Option)
C. Free from Shock and Vibration
The tool-free internal 3-axis mounting mechanism is strong enough to hold the
camera set against severe vibration or shock on the dome.
D. Rust free against salty environment
The unit is fully protected from a salt mist environment with hard salty-water
resistant coating.
E. Dust and Moisture free (IP66 Weatherproof)
The unit is duly passed IP66 international weatherproof standard, allowing the
camera free from moisture and dust.
F. Fire resistant
Hard die-cast body and fully metallic internal camera mount mechanism are
designed to be totally protective from fire breaks or fire interception.
1/2” Conduit-holes are provided for fire resistant cable management.
D. Additional service monitoring output
1 / 2 "
3) Perfect protection from all kinds of conceivable dangers
I p 6 6 H a r s h
W e a t h e r p r o o f
Before sending the camera out for repair, check the items below. If the problem persists after
checking these items, contact your service center.
Problems
Trouble shooting
Nothing appears on the
screen.
Please check the power connection.
Please check the video signal line connection .
The video image is not
clear.
Pl ease check if the lens or the outer glass is clean.
- Dirt or fingerprints on the lens can affect the image
blooming or reflection. Gently wipe any dirt or
fingerprints off the lens or the glass with a soft cloth.
Please check and adjust contrast feature o f the monitor
Please check if the camera is exposed directly toward a
bright light, sunlight, or sun light reflecting area.
Please move the camera ’ s position in this case.
The screen is dark.
Please check and adjust contrast feature of the monitor
If ther e is any interim equipment, set the Hi-z position
p roperl y and check the terminals.
Please check if the power supply is within the
specification.
- When the cable connection requires a long distance,
there may need a higher power supply or an additional
power/video amplification.
The camer a ’ s surface is too
hot and black strip e s
appear on the screen.
Please check if the power supply is regul a ted and is
within the standard requirement of the product.
The screen is flickering.
Please check if the camera is facing directly toward
sunlight or fluorescent light.
IR beam is weak
Check if the distance of the cable installation is too long
or if the cable is not UL standard. Using a lower grade
cable or long distance cable installation can cause a
serious voltage drop. Please check the voltage output
level of the cable and change the power source in this
case. Make a special care not to supply too much
power over the camera as well.
