Vision Tech VDA140 Instruction Manual Download Page 2

Dear Customers! 

INFORMATION 

By selecting this product, you have decided to use a professional device that 
guarantees highest quality and reliability. We would like to thank you very much for 
your confidence and kindly ask you to read the following instructions carefully 
before Installation and operation in order to take full advantage of all quality 
features regarding this product.

CAUTION 

CAUTION 

RISK OF ELECTRIC  

SHOCK 

DO NOT OPEN 

 

TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE THE COVER (OR BACK). 

NO USER SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED PERSONNEL. 

 

 

The lighting flash with an arrowhead symbol, within an equilateral 
triangle is intended to alert the user to the presence of uninsulated 
dangerous voltage within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to 
alert 
the user to the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the appliance.

This equipment has been tested and found to comply with limits for a Class A digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is operated 
in a commercial environment. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his own expense. 

WARNING 

Changes or modifications not expressly approved by the manufacturer could void 
the user’s authority to operate the equipment.

CAUTION – 

To prevent electric shock and risk of the fire hazards 

   Do NOT use power source other than that specified.
   Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform to 

all local codes.

Table of contents

1. Precautions ------------------------------------------------------- 4  
 
2. Limitation of liability --------------------------------------------- 5 
 
3. Disclaimer of warranty ----------------------------------------- 5 
 
4. Package ----------------------------------------------------------- 6 
 
5. Installation ----------------------------------------------------- 7~9 

 

6. Features ----------------------------------------------------- 10~12 
     
7. Trouble shooting guide --------------------------------------- 13 
 
8. Dimension ------------------------------------------------------- 14 
 
9. Specification ---------------------------------------------------- 15 
 

Summary of Contents for VDA140









Reviews: